BAIKALER

DMK-006P P Series 6 Sets Drum Microphone

2011-07-16 10:56:48 Browse:536Times



              



DMK-006P Series Technical  Specifications:

 

BK-52P
1-Tailored frequency response is smooth and extended. Tuned specifically for kick drum applications.
2-Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
3-Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
4-Cartridge includes a neodymium magnet for high output level.
5-Internal shock mount for reduced handling noise.
6-Durable metal construction.
7-Integral stand mount.
8-Hardened steel mesh tapered grille that resists wear and abuse.

TECHNICAL SPECIFICATIONS:
Type : Dynamic
Frequency Response : 30-13K Hz
Polar Pattern : Cardioid (unidirectional)
Rated Impedance : 300 Ω
Sensitivity (at 1,000 Hz) : -55 dBV/Pa× (1.8 mV)

BK-56P
1-Tailored frequency response is smooth and extended. Tuned specifically for drum applications.
2-Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
3-Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
4-Cartridge includes a neodymium magnet for high output level.
5-Internal shock mount for reduced handling noise.
6-Durable metal construction.
7-Integral stand mount.
8-Hardened steel mesh tapered grille that resists wear and abuse.

TECHNICAL SPECIFICATIONS:
Type : Dynamic
Frequency Response : 50-15K Hz
Polar Pattern : Cardioid (unidirectional)
Rated Impedance : 200 Ω
Sensitivity (at 1,000 Hz) : -56 dBV/Pa× (1.6 mV)

BK-81P
1-Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
2-Cardioidpolar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
3-Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
4-Powered by AA battery or phantom power supply.
5-Internal shock mount for reduced handling noise.
6-Durable metal construction.
7-On/off switch for onstage control.

TECHNICAL SPECIFICATIONS:
Type : Condenser (electret bias)
Frequency Response : 40-18K Hz
Polar Pattern : Cardioid (unidirectional)
Output Impedance : 600 Ω
Sensitivity (at 1,000 Hz) : -48 dBV/Pa× (4.0 mV)
Power : 11 to 52 Vdc Phantom/1.5V alkaline AA size
 

Back